|
|
 |
MODELL:
BA392V1
/ BA392V2 |
|
| SMD-BESTÜCKUNGSAUTOMAT |
|
|
| SUMMARY |
•
|
Large 650
mm x 350 mm placement area |
•
|
Suitable for
160 intelligent Auto Tape Feeder |
•
|
High Accuracy
and high Flexibility for 01005, 0201, 0402, 0603, SOIC, PLCC,
BGA, µBGA, CSP, QFP, up to fine-pitch 0.3mm |
•
|
Smart Feeder
System provides Automatic feeder position checking,
Automatic component counting, Production data Traceability |
•
|
Perfect for
small & medium volume production |
• |
COGNEX® Alignment
System “Vision on the Fly” |
• |
Bottom Vision
Alignment System for fine pitch QFP & BGA |
• |
Built in Camera
System with Auto Smart Fiducial Mark Learning |
• |
Dispenser system |
• |
Vision Inspection
before and after production |
• |
Windows XP Software |
• |
Universal CAD
Conversion |
• |
Placement rate:
6,400 cph |
• |
Tray Handler
access up to 14 Waffle Trays |
|
| |
AUTOTRONIK
BA392 features high-precision, direct-drive ball screw and
linear encoder
technology in the X and Y axes, contributing to its 30 µm,
3 Sigma placement accuracy. With high-power AC servo motors
allowing placement rates approaching 6400 cph.
With feeder bases on all four sides, BA392 has maximum 8mm
smart type feeder capacity of 160, and 650 mm x 350 mm of
payload area can be shared by PCBs and waffle trays. Placement
area increases to 660 mm x 330 mm with feeder bases mounted
on only the front and rear of the system and an in-line
conveyor installed. BA392 with stand-alone or In/Out conveyor
configurations is suitable for any In-Line or "Work
Cell" manufacturing environment.
The head-mounted, upward-aimed cameras with Cognex®
vision processing and programmable illumination of BA392
allow easy set-up for a wide range of SMDs, including odd
form components and BGAs. Base mounted cameras with a wider
optical range and diagonal split-vision image processing
can even be used for alignment of large components up to
150 mm x 100 mm. |
| |
|
|
| |
|
